Audio Technica Dual Moving Coil Cartridge With Elliptical Stylus - AT-OC9XEN

Authorized Dealer Price Match Guarantee
Price Match Guarantee
Krazy Kiley's offers a price match guarantee for lower priced items on identical in-stock items from competing authorized dealers. Exclusions Apply*.
Our Price $499.00 CAD

Or as low as $83.17/month over 6 months. Apply Now


Literature

The AT-OC9XEN Dual Moving Coil cartridge with nude elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the low-mass nude elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.

Features

  • Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
  • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
  • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
  • Features low mass nude elliptical stylus and aluminum cantilever
  • A neodymium magnet and pure iron yoke provide increased magnetic energy
  • Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
  • Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
Specifications
Recommended Load ImpedanceMin. 100 ohms (when head amplifier is connected)
Stylus ConstructionNude square shank
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Vertical Tracking Angle 20°
Channel Separation25 dB (1 kHz)
Frequency Response20-30,000 Hz
Wire Used for CoilPCOCC
Weight7.6 g (0.3 oz)
TypeDual Moving Coil
Terminal PinsBrass
Stylus SizeNude square shank
Stylus Curvature Radius0.3 x 0.7 mil
Mounting FeatureHalf-inch mount
ModelAT-OC9XEN
Body MaterialAluminum
Accessories IncludedNon-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
Dimensions17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Cartridge Weight7.6 g
Mounting Half-inch
Dynamic Compliance9 x 10-6 cm/dyne (100 Hz)
Static Compliance20 x 10-6 cm/dyne
CantileverAluminum pipe
Stylus ShapeElliptical nude
Output Channel Balance1.5 dB (1 kHz)
Output Voltage0.35 mV (at 1 kHz, 5 cm/sec)
Coil Inductance25 mH (1 kHz)
DC Resistance12 ohms
Coil Impedance12 ohms (1 kHz)

Write a review