Audio Technica Dual Moving Magnet Cartridge With Shibata Stylus - VM750SH
Authorized Dealer
Price Match Guarantee
| Our Price |
$599.00 CAD |
Or as low as $99.83/month over 6 months. Apply Now
Audio Technica Dual Moving Magnet Cartridge With Shibata Stylus - VM750SH
VM750SH
The VM750SH Shibata stylus cartridge is a premier 700 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM750SH is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s Shibata stylus provides greater surface contact with the record groove than an elliptical stylus does, resulting in the pickup of ultra-high frequencies with less groove stress and distortion. Includes mounting hardware.
Features
- VM dual magnet cartridge with Shibata stylus
- Aluminum tapered cantilever
- Paratoroidal coils improve generating efficiency
- Center shield plate between the left and right channels reduces crosstalk
- Die-cast aluminum alloy housing reduces vibration and adds a natural electrical shield
| Specifications | |
|---|---|
| Weight | 8.0 g (0.3 oz) |
| Type | VM Type |
| Replacement Stylus | VMN50SH |
| Stylus Size | 0.26 x 2.7 mil |
| Recommended Load Capacitance | 100-200 pF |
| Mounting Feature | Half-inch mount |
| Accessories Included | Four cartridge installation screws (5 mm x 2, 10 mm x 2), two washers, two hexagon nuts, non-magnetic screwdriver, brush, lead wire set |
| Dimensions | 17.3 mm (0.7") H x 17.0 mm (0.7") W x 28.2 mm (1.1") D |
| Mounting | Half-inch |
| Static Compliance | 40 x 10-6 cm/dyne |
| Dynamic Compliance | 10 x 10-6 cm/dyne (100 Hz) |
| Cantilever | Aluminum tapered pipe |
| Coil Impedance | 2,700 ohms (1 kHz) |
| DC Resistance | 800 ohms |
| Coil Inductance | 460 mH (1 kHz) |
| Output Voltage | 4.0 mV (at 1 kHz, 5 cm/sec) |
| Output Channel Balance | 1.0 dB (1 kHz) |
| Stylus Shape | 2.7 x 0.26 mil Shibata |
| Recommended Load Impedance | 47,000 ohms |
| Stylus Construction | Nude square shank |
| Vertical Tracking Angle | 23° |
| Vertical Tracking Force | 1.8-2.2 g (2.0 g standard) |
| Channel Separation | 30 dB (1 kHz) |
| Frequency Response | 20-27,000 Hz |
Write a review
Featured Products
AT-VM95C
AT-MONO3/LP
AT-VM95SP/H
AT-OC9XML
AT-VM95SH/H
VM760SLC
AT33MONO
ATN3600L
AT-VM95EN/H
VM670SP
AT-OC9XEN
