JL AUDIO 6.5 Inch Enclosed Coaxial System Gloss White Sport Grilles - M3-650VEX-Gw-S-Gw
JL AUDIO 6.5 Inch Enclosed Coaxial System Gloss White Sport Grilles - M3-650VEX-Gw-S-Gw
M3-650VEX-Gw-S-Gw
M3 6.5-inch Marine Enclosed Coaxial Speaker System (60 W, 4 Ω) - Gloss White Enclosure, Gloss White Sport Grille
Ideal for powersports, marine and off-road vehicle applications, these enclosed speaker systems include our high-performance, M3 6.5-inch marine coaxial speakers with silk dome tweeters housed in rugged, injection-molded enclosures to deliver clean, loud audio.
A rotating clamp receiver is included with each VEX™ pod to mate with an appropriate fixture (sold separately) for mounting to a flat surface, roll-cage or tower structure, allowing precise aiming for optimum sound. Pipe mounting fixtures (sold separately) are available in a variety of sizes to fit a wide range of tube diameters.
A weatherproof, Lexan™ rear logo appliqué trims the rear of each pod, which can be oriented to match any mounting position. For convenience, ten feet of our 16AWG marine-grade, parallel conductor speaker cable is included with each VEX™ pod.
Although VEX™ pods can be used with as little as 20 W per channel, we recommend powering these systems with an amplifier capable of 60-120 W of continuous power per channel. For best results, use with a subwoofer.
Like all JL Audio marine speakers, this system is weatherproof and built to deliver years of listening enjoyment.
Sold as a pair.
Product is pictured with Pipe-Mounting Clamps (sold separately).
Need help determining the correct Pipe-Mounting Clamp for your installation?Download the VeX Pipe Fixture Ruler.
General Specifications
Continuous Power Handling (RMS) | 60 W |
Recommended Amplifier Power (RMS) | 20 - 120 W / Ch. |
System Efficiency | 89.5 dB @ 1 W / 1 m |
System Nominal Impedance | 4 Ω |
System Frequency Response | 100 Hz - 25 KHz ± 3 dB |
Physical Specifications
Enclosure Diameter (A) | 7.03 in / 179 mm |
Enclosure Depth (B) | 6.16 in / 156 mm |
Height including Mounting Clamp Receiver* (C) | 7.27 in / 185 mm |
Mounting Clamp Receiver / Enclosure Offset (D) | 0.20 in / 5 mm |
*Mounting Clamps Required (Sold Separately) |